`
On Valentine’s Day, what could be more exciting for Rwanda SugarTA than DIY gifts? ? Hurry up and have a geek-flavored romantic Valentine’s Day! (Audience: But Valentine’s Day has already passed Rwandans Escort! Even White Valentine’s Day has passed! I really love the right person. , Valentine’s Day is celebrated every day~)
The pure manual work has begun. There is not much technical difficulty, it just needs to be careful and test aesthetics, logic and knife skillsRW Escorts. 1 Rwandans Sugardaddy Tools and Information
● The cutting head of the carving knife is not difficult to break, but it doesn’t matter. It does not affect the use. It is best to change the blade after carving for a period of time, so that it is easier to cut.
● Drawing pencil
● A 35w or 50w soldering iron is fine
● File
StartRwandans Sugardaddy Use a pencil to draw a large heart shape of about 5*5.5 on the Rwandans Escort ABS board, and then use a carving knife To cut it out, I used an ABS board of about 1mm, which is not very thick. RW Escorts It doesn’t need to be used completely to be able to be worn. Basically Carve it to half the depth and then pull it up with your hands. Carve out the frame of the Rwanda Sugar Daddy heart along the inner edge of the cut heart shape (about 5mm wide).
Cut out the outer heart shape as the base. Then place Rwanda Sugar at the appropriate first section of the heart-shaped baseRwandans EscortUse a knife to cut a small rectangular groove, and cut the tip of the heart-shaped frameRwanda Sugar Daddy Insert it out and fix it with glue.
3 Build a heart-shaped base frame
In the heart shapeRwanda Sugar Daddy Use a knife to cut out a small rectangular section at the tip of the base RW Escorts Insert the pointed end of the heart-shaped frame into the groove, and then use glue to fix the heart-shaped square opening in the air. At the back, that is, behind the adhesion point of the heart-shaped frame, use a brick to turn a hole on the left and right, turn the bent iron rings through the heart-shaped base respectively, connect them to the positive and negative electrodes of the battery compartment, and use a soldering iron to weld the battery compartment firmly to the front. The kind that puts the battery in, do not choose the kind that puts the battery in from below. Use mold glue to fix the battery compartment Rwandans Sugardaddy to the base. Rwandans Escort Since the battery compartment is plastic, you can use mold glue or Rwanda Sugar has very good adhesion. After welding and adhesion, pour the joint with silicone to increase the solidity index again.
4 Carve out the shiny caution and the big name at the back The scheming and cutting method is the same. First, draw a 1.3*1.Rwanda Sugar 4mm shape on the ABS board, and then carve it with a carving knife. Go up and engrave the rest RW Escorts as they should. I carved 6 of them, 3 on the front and back, how many numbersRwandans Escort can Rwandans Escort be based on hobbies, But there are too many to fit in.
5 Use a silver wire of about 0.7mm to solder the LERW EscortsD lamp, all positive electrodes are welded to the positive electrode of the heart-shaped iron ring, and all negative electrodes are welded to the negative electrode of the heart-shaped iron ring. Weld 3 on the front and 3 on the back, color Set according to your preference. Then glue the LED light-emitting surface to the small heart shape.
Rwanda Sugar
Two gentlemen kissing behind the Heart Tree! The master can use his imagination or carve a word. I improvised it, Rwanda Sugar Daddyadds some flavor, haha
7 Light up the lights
You can add some color Rwandans Sugar Daddy Send this mysterious gift in the morning, Rwanda Sugar Daddy In the dark room, sweet treats shine Click, a snort can’t escape Rwanda Sugar.
. …………Rwanda Sugar………………………………………………………………Rwandans Escort…………………………………………RW Escorts…………………………………………
發佈留言