Infrared Rwanda Sugar Daddy thermal imaging camera – a good helper for geothermal inspections

作者:

分類:

`

Ground heating is the biggest hidden problem in the homeRwanda Sugar project. Once water leakage occurs, it is indeed a serious problemRwandans EscortA disaster needs to be solved Rwanda Sugar Daddy Replacing the pipes from scratch will cause serious damage to the decoration. RW Escorts has been doing everything in the industry for many yearsRwanda Sugar method is to call each sharing route <a href="https://rwanda-sugar.com through the RW Escorts process /”>Rwanda Sugar Pressed by Rwandans Sugardaddy by Rwandans EscortChanges in the pressure within the tube Rwandans Escort over a period of timeRwandans Sugardaddy value judgment Rwandans Sugardaddy determines whether there is pressure loss and water leakage in the pipeline Suspected, but this method can only determine which geothermal coil may be leaking, but it cannot locate where the leaking water is, which brings a lot of inconvenience to maintenance, repair and inspection staff and residents.

Recently, many customers have inquired about infrared thermal imaging cameras, including Rwandans Sugardaddy Can external thermal imaging cameras detect geothermal water leaks. Tomorrow Agitek will share our skills with the masters and share them with customersRwanda Sugar Daddy went to a community in Xi’an to test a leak detection test to learn about the situation American FLIRwandans Sugardaddy R) How the C2 pocket thermal imaging camera helps locate leaking water drops in geothermal coils.

The first step is for the customer to find out which path of geothermal plate is based on experience If the pipe is leaking, then technically turn on the American FLIR C2 infrared thermal imaging RW Escorts instrument and use the C2 infrared heat Imager to find the specific location of water leaks.

The second step is to turn on the geothermal wall-mounted boiler and set the water temperature to Rwandans EscortAdjust Rwanda Sugar to 60℃ or higher to form a clear temperature contrast and facilitate the identification of leaking water drops.

The third step is to open the suspicious shared path and use the thermal imaging camera to detect it. It will take about 15-30 minutes to use the thermal imaging camera to stop Rwanda Sugar DaddyThe golden age of detection (Figure 1RW Escorts).

Rwanda Sugar Daddy


Figure 1

If the time is too short, the water in the water pipe is not hot yet, and the temperature difference is not obvious; if the time is too long, the ground has been sufficiently heated, and the temperature difference is not obvious, so 15 -The detection results of using a thermal imaging camera will be more obvious after 30 minutes (Figure 2).


Figure 2

Rwandans Sugardaddy

In the fourth step, at the scene, we used the C2 infrared thermal imaging camera to see the location of the leaking water droplets. It showed that the temperature of the leaking water droplets was very high, but it was within an area. All Rwandans EscortHotRW Escorts‘s. (As shown in Figure 3, Figure 4).


Figure 4

After confirming the water leakage, the customer Rwanda Sugar informed We originally suspected that there was underground water leakage from the water collector. If Rwanda Sugar was not detected by a thermal imaging camera, we could Rwandans EscortThey are about to pry open RW Escorts for inspection in the air, The loss will be huge, far more than the price of an American Philly C2 thermal imaging camera of several thousand yuan. Nowadays, when using the C2 thermal imaging camera for inspection, you only need to cut out a small area of ​​the wall. This not only reduces losses, but also saves inspection time.

Think more RW Escorts Follow the public accounts that care about us


留言

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *